McFarlane's DC Multiverse wave and Hasbro's electronic Master Sword lead a busy news cycle that also brought a horror-leaning INART Pennywise and a fresh Star Wars Vintage Collection reissue.
DC Multiverse Plastic Man (The Terrifics) & Green Lantern Corps Sinestro
McFarlane's DC Multiverse line adds two fresh faces to the shelf this week: Plastic Man in his Terrifics look and a Green Lantern Corps take on Sinestro. Plastic Man gets the stretch-hero treatment collectors expect from the line, while Sinestro brings that signature yellow ring energy front and center in Corps colors rather than his usual villain palette. Both are up for pre-order now straight from McFarlane's DC Multiverse wave. If you've been building out a Terrifics or Corps display, this is the pair to grab.
EXO-6 Star Trek Lt. Commander Spock (Environmental Suit)
EXO-6 is digging into deep-cut Star Trek: The Original Series material with this Lt. Commander Spock figure, decked out in the environmental suit from The Naked Time. The orange-and-silver suit was famously improvised on the original show from shower curtain material, and EXO-6 has translated that costume into a 1/6 scale build with ABS, PVC, and real fabric. It ships with a tricorder, a spectrum analyzer, and a display base, all officially licensed. For a franchise this picked over, going after an episode-specific costume instead of the usual uniform is a nice change of pace.
NECA Fortnite x Teenage Mutant Ninja Turtles
NECA's Fortnite crossover figures are here, and all four Turtles are in stock now. Raphael, Michelangelo, Leonardo, and Donatello are each $29.99 at Target, built with the game-accurate sculpts from their Fortnite skins rather than the usual NECA TMNT look. Every figure comes with signature weapons, interchangeable hands, and a code that unlocks emotes in-game, so this is one of those rare toys with a real digital tie-in. NECA says wider retail distribution is coming, but if you want first crack, Target has them now.
Jurassic World Legacy Collection Real Feel Tour Takeover T-Rex
Mattel's Legacy Collection is pulling from the original Safari Tour Ride vehicle at Jurassic Park for this new Tyrannosaurus Rex, giving it a retro look dressed up with modern features. Press a button and it chomps and roars, and the joints are articulated enough for real posing rather than just a static shelf piece. It also plugs into the free Jurassic World Play App, where scanning the figure's tracking code unlocks AR content and digital collectibles. It's rated for ages 4 and up, so it splits the difference between a kid's toy and something a Jurassic Park collector will still want on the shelf.
INART IT: Welcome to Derry Pennywise (Bloody Version)
INART is going all in on the horror with this Pennywise figure from IT: Welcome to Derry, and the bloody variant does not hold back. Beyond the classic clown getup, this 1/6 scale sculpt gives Pennywise bat-like wings and bird-like talons, leaning into the monster underneath the makeup. It's an 18-and-up piece given how graphic the detailing gets, so don't expect this one on a family shelf. Pre-orders open September 11, so this is very much a heads-up rather than a buy-now situation.
Takara Tomy T-Spark Toyrise Evangelion Unit-01
Takara Tomy's TOYRISE line takes on Evangelion Unit-01 from Rebuild of Evangelion at about 9.5 inches tall, and it comes loaded. You get eight interchangeable hands and four different weapons, the Progressive knife, the Magoroku Exterminate sword, a Counter sword, and the Palette rifle, plus an umbilical cable to complete the look. The 3mm hardpoints scattered across the body mean this one plays nice with other TOYRISE gear if you're already collecting the line. Just know the instructions are Japanese-only, so this is more for the pose-and-display crowd than kids.
GI Joe Classified Series Dreadnok Thunder Machine
The Dreadnok Thunder Machine is back as a made-to-order piece in Hasbro's G.I. Joe Classified line, scaled to match the 6-inch figures and built with modular parts pulled straight from the vintage original toy. It's a big vehicle at 21 inches long and 12 inches tall, priced at $125, but there's no Thrasher figure in the box, so you'll need him separately if a driver ever shows up. This one is a Hasbro Pulse exclusive, and the pre-order window runs until October 23rd with cancellations allowed through November 9th. Worth noting Hasbro now charges when the pre-order window closes rather than at shipping, so budget accordingly.
Hasbro Legend of Zelda Electronic Master Sword
Hasbro's electronic Master Sword brings Tears of the Kingdom's signature weapon to life at 27 inches, with over 15 sound effects built in. Touch triggers pickup and placement sounds, while swinging it sets off motion-responsive combat effects, and there's a helping of the game's classic music mixed in too. It's officially licensed with Nintendo, runs on included AAA batteries, and rings in around $42.99. Rated for ages 4 and up, it's an easy pickup whether you're cosplaying Link or just want a legendary sword on the wall.
LEGO The Legend of Zelda: Link & Epona
LEGO is joining The Legend of Zelda's 40th anniversary celebration with a new Link and Epona set, revealed through IGN. There's no pricing or piece count yet, just the reveal itself, but pairing Link with his horse is a natural pick for a franchise-anniversary set. LEGO has built a strong track record with its licensed video game sets, so expect more specifics as the set gets closer to release. Keep an eye out here as details firm up.
Star Wars Vintage Collection Antoc Merrick X-Wing Fighter (ReIssue)
Hasbro is reissuing the Antoc Merrick X-Wing Fighter from the Vintage Collection, pulling the Rogue One pilot's ride back into circulation for anyone who missed it the first time. It's priced at $119.99 with a shipment window expected in October 2026. Rogue One vehicles don't get reissued all that often, so if this one slipped past you before, this is the easy second chance. Standard Vintage Collection scale and detailing apply here, matching the rest of your 3.75-inch lineup.
Marvel One:12 Collective Blade (Midnight Sons)
Mezco's One:12 Collective is bringing Blade into the Midnight Sons roster, and the accessory count alone makes the case for this one. Three interchangeable head portraits let you dial in his expression, and the loadout covers two submachine guns, a customized machine gun with a removable blade, throwing glaives, a katana, and stakes for when the guns aren't enough. With over 30 points of articulation and fourteen swappable hands, it's built for serious posing, not just a display stand pass-through. It's $125 and ships May 2027, so there's a wait, but Mezco's One:12 quality has earned that patience before.
Transformers X Evangelion Synergenex Evangelion Prime Unit-02
Takara-Tomy dropped three pre-orders at once, and the standout is the Transformers X Evangelion crossover, an Evangelion Prime Unit-02 figure built in Synergenex Series style for $89.99. Alongside it, the Dramatic Capture Series is sending a Grimlock and Ratchet two-pack to Dinobot Island for $124.99, and the New Legends line adds NL-08 Delta Magnus Primal Vanguard at $144.99. All three ship April 2027, so this is a save-your-money-now situation more than a snap decision. If you collect either franchise, or both given the crossover, there's something here worth planning around.
GI Joe Classified Series Nemesis Immortal (ReIssue)
Nemesis Immortal is getting a second wave of pre-orders after the original G.I. Joe Classified release sold out everywhere. It's priced at $51.99 with a shipping window expected in November 2026, giving anyone who missed the first round an actual shot at the figure this time. Reissues on Classified figures that fully sold out don't happen automatically, so it's worth grabbing this one while it's open rather than hoping for a third chance. Standard Classified Series scale and articulation carry over from the original release.
That's the Roundup for Today
That's everything worth knowing from today's toy news cycle. If any of these reveals got your wheels turning on a custom commission, hit us up on the commission page — we do custom 3D printing, hand painting, and laser engraving right here in the studio. See you tomorrow!
As an Amazon Associate and Entertainment Earth affiliate, we may earn from qualifying purchases made through links in this post.