A quieter cycle out of the toy press today, but Beast Kingdom's armored Batman and Sideshow's Snape statue both earned a second look. Round it out with a corrupted turtle, a few pre-order alerts, and one very well accessorized Bruce Lee.
NECA TMNT Cartoon Ultimate Dark Leo
NECA pulled Leonardo through a dimensional twist for this one, taking the loyal turtle and flipping him to The Shredder's side after a trip through one of Donatello's portals. It's the kind of corrupted hero design that always sells better in plastic than it should, right down to the color swap and the meaner face sculpt pulled from IDW's Saturday Morning Adventures comic. The 7 inch scale figure carries a sword and mace, plus a mind control mask sized to fit the rest of your turtle lineup if you pick those up separately. It's in stock now at Amazon for $34.99, no pre-order wait involved.
Severus Snape Premium Format Statue
Sideshow went all in on posture for this one. Snape stands rigid at just over 20 inches tall, robes sweeping down over sculpted boots with the tunic's white trim doing a lot of the visual work against all that black fabric detail. Every button and pocket on the cassock overcoat got individual attention, and the base is where the real payoff sits, stone and oak architecture styled after Hogwarts itself with all four house crests worked into the round platform. It's an officially licensed polystone piece done in collaboration with Warner Bros., and pre-orders are open now through our sponsor.
One-Punch Man Amazing Yamaguchi Genos
Kaiyodo caught Genos in his upgraded look from the back half of season two, and the mechanical sculpting under that removable hoodie is the whole draw here. Peel the fabric back and the cyborg framing shows through, with damaged jeans doing the same trick lower down to expose more of what's underneath. The Amazing Yamaguchi articulation system is built for the kind of exaggerated combat poses this character demands without looking stiff doing it, and Genos comes loaded with deployable Dual Blades plus a set of effect parts for recreating his bigger attacks. Six alternate faceplates and six hand sets round out the box at 6.5 inches tall.
Search Entertainment Earth | Buy on Amazon
G.I. Joe Classified File Cards: Mainframe, Grim-Viper, Wetsuit and Sci-Fi
Hasbro dropped another round of file cards for the Classified Series today, this time covering Mainframe, Grim-Viper, Wetsuit and Sci-Fi. No figures in hand yet, just the character bios and art that usually precede a reveal by a few weeks in this line. For a roster this deep, the file cards are worth tracking on their own since they tend to tip off which specialists are getting the Classified treatment next.
NECA Insidious Figure Tease
NECA teased its first Insidious figure today with a single shadowy shot and nothing else attached to it yet. No scale, no accessories, no release window, just confirmation that the Further is getting the NECA treatment eventually. Horror collectors have been asking for this license for a while, so even a bare bones tease like this one is worth flagging until the full reveal lands.
Fallout McFarlane Elite Edition T-45B Nuka Cola
McFarlane's Elite Edition line keeps finding new ways to reskin the T-45B, and the Nuka Cola deco is a fun one for anyone who spent too many hours running quests for that soda in the Wasteland. This 7 inch figure packs 22 points of articulation and swappable parts, which matters a lot on a suit this bulky since it actually holds a full range of combat poses instead of just standing there. The loadout is generous too: pistol, assault rifle, shotgun, sniper rifle, sword, a mini nuke, and dynamite all included, along with a figure base, a collectible art card, and an Elite Points card for redeeming extras down the line. Pre-orders are open now across the usual retailers.
Pre-order at Entertainment Earth | Buy on Amazon
Funko Lost Boys and Attack on Titan Pop! Vinyl Figures
Funko opened pre-orders on a fresh batch of Pop! figures spanning The Lost Boys and Attack on Titan, two licenses that don't usually share a headline but both round out collections nicely on their own. Details on the individual sculpts are still thin, but the pre-order window is live now for anyone chasing a specific character before it sells out.
Shop Funko at Entertainment Earth | Shop Funko at Amazon
Factory Entertainment Replay: Magnum P.I., Miami Vice, Six Million Dollar Man and Airwolf
Factory Entertainment is building out a Replay line at 3.75 inch scale that reaches straight into 80s network television, pulling in Magnum P.I., Miami Vice, Six Million Dollar Man, and Airwolf under one banner. It's a strange and charming mix on paper, four completely different shows united mostly by nostalgia and mustaches. No pricing or release date yet, this is still an early look, but it's worth keeping an eye on for anyone who grew up on that era of TV.
Hiya Toys Exquisite Basic Starship Troopers Warrior Bug
Hiya Toys is bringing the Warrior Bug into its Exquisite Basic line at 5.31 inches, and the sculpt leans hard into the exoskeleton detail that made the Starship Troopers bugs so unsettling on screen. The broad carapace head, the four segmented legs, and the pair of scythe like attack limbs all read as sharp and aggressive rather than cartoonish, helped along by a deep black and dark brown paint job with yellow stripes and scarlet markings picking out the texture. Multiple articulated joints keep the legs and forward limbs posable, so you can actually stage a swarm instead of a static lineup. It ships with a display base and support arm to keep that low profile body upright.
Shop Hiya Toys at Entertainment Earth
Beast Kingdom Dynamic 8ction Heroes Armored Batman
Beast Kingdom's DAH line is tackling the armored suit Bruce built for himself in The Dark Knight Returns, and the modular plating over an already articulate body is exactly the kind of design this line does well. Three head sculpts come in the box, a full helmet, a partially damaged version, and a bare Bruce Wayne head, so you can display whichever moment of the story you like best. LED light up eyes and a fabric undersuit and cape add some texture beyond the plastic, and the accessory count is solid too: extra hands, shock effects, an acid spray, and a kryptonite gas arrow. At 8.46 inches, it's a satisfying size for how much armor is packed onto the frame.
Pre-order at Entertainment Earth | Shop DC Comics at Amazon
Ichigo Ichie Series 3: DC Comics Baddies
The Ichigo Ichie line takes its name from a Japanese phrase about treasuring an encounter that will never happen quite the same way again, and series 3 applies that idea to four of DC's meaner personalities. Lobo, Clayface, The Penguin, and The Riddler all get the softened, big eyed treatment here, hand painted with a finish that leans cute rather than menacing. Each figure is officially licensed and produced as a limited run that won't be reproduced once it sells through, so this is one of those lines where waiting around usually means missing out.
Pre-order at Entertainment Earth
Playmates MonsterVerse Monarch: Legacy of Monsters 4-Pack
Playmates' Monarch: Legacy of Monsters 4-pack landed on Amazon today at 6 inch scale for $44.99, a solid bundle price for anyone trying to build out the MonsterVerse side of a shelf without buying figures one at a time. It's in stock right now, no pre-order wait attached.
INART Bruce Lee (Yellow Jumpsuit) 1/6 Scale Figure
INART opened pre-orders today on its take on Bruce Lee's iconic yellow jumpsuit look, and the accessory list here is the real story. Two head sculpts, calm and expressive, let you swap the mood of the display, while the hand sets cover everything from relaxed and gesturing poses to dedicated grips for the included bamboo staff and nunchaku. A staircase diorama piece comes packed in too, clearly built to recreate one specific iconic sequence rather than just standing on a generic round base. For a 1/6 scale figure built entirely around one costume, this is about as thorough as a parts count gets.
That's the Roundup for Today
That's everything worth knowing from today's toy news cycle. If any of these reveals got your wheels turning on a custom commission, hit us up on the commission page — we do custom 3D printing, hand painting, and laser engraving right here in the studio. See you tomorrow!
As an Amazon Associate and Entertainment Earth affiliate, we may earn from qualifying purchases made through links in this post.